SSP: £5.60
Part No: T-F8/59
Solar Film Heather (Solartrim) - 36x12.5"
Glossy, sticky-backed trim film, supplied on a paper support sheet. Very thin and flexible. Used for colour decoration on film covered models. Can be cut out to make lettering, insignia, etc. Best results if applied to a smooth surface - does not adhere well to rough or textured surfaces, e.g. Solartex. Can be moulded round wingtips, etc., by heating and stretching like Solarfilm.
Shapes are drawn on the back of the paper support, then cut out. Can be applied ‘dry’ by peeling off the paper and pressing on to the surface to be decorated or ‘wet’ by floating on to the surface with soapy water (like a waterslide transfer/decal). Large or complex shapes are easiest to apply wet.